Uniden Support - Downloads and Manuals

Search Again

Downloads

Product Filename Version Description Release Date
R9 R9_20250106_v136db250103.zip 1.36 Firmware Update v1.36

Bundled with the latest database 2025/01/03.
See previous for release notes.
01/06/2025
R9 R9_FULL_SW_v1.36_db241002_24.11.13.zip 1.36 Firmware Update v1.36

Please use the Uniden R Series Tool to update your firmware.

  • Release Notes
    • If you set the Level of K Block Filter when the City Mode is Auto, the Level setting of K Block Filter is matched to the Highway mode the same as other R-series model in order to avoid frequent changes in the K block filter level setting criteria when the mode is frequently changed to City or Highway depending on the vehicle speed in Auto mode .
    • Fixed codes that could potentially cause some Auto Mute Memory points to fail to mute in regions where multiple Mute Memory points and Auto Mute Memory points are registered.
12/16/2024
R9 R9_FULL_SW_v1.35_db241002_24.11.01.zip 1.35 Firmware Update v1.35

Bundled with database 2024/10/02

  • Release Notes
    • Laser Transponder and Interface error messages are added.
      The error message displays on the Display screen with voice If the Laser Transponder or Interface is not working correctly.
    • Interface Error Message is added to Installer Test Mode.
      The error message displays on the Display screen with voice If there is an error with Interface when running installer Test Mode
    • The range of K Block 3 is modified from 24.121~ 24.124GHz to 24.123~24.124GHz
    • Auto Mute Alert Level feature is added. The existing Auto Mute On/Off is deleted from the menu and Auto Mute is integrated into Auto Mute Alert Level as below.
      • Delete the existing Auto Mute On/Off from the menu.
      • Add Off to the Auto Mute Level (Auto Mute Level : 1~5, Off)
        • Off is the same as the behavior of the existing Auto Mute Off, and the Auto mute function does not work when setting it to off.
          When setting it to Off, the Auto Mute Level function is not turned off, but the Auto Mute function is turned off.
        • If setting it to 1~4 level, the alert is auto muted only when the alert level is below the set Auto Mute level, and if an alert level exceeds the set Auto Mute level, it will not be auto muted.
        • If setting it to 5 level, Auto mute is applied to all levels, so it works the same as the existing Auto Mute On. (Auto Mute Level : 5 = Auto Mute On)
    • Alert temporary volume feature is added. During an alert, it works separately and temporary from the main volume.
    • Main Volume setting is added to the Menu.
    • The Bluetooth On/Off and BT Pairing are moved to be before GPS On/Off menu in the Menu.
    • Low speed (5Km/h) filter for POI(Redlight, Speed cam) alerts is added.
    • Mute Memory Tracking errors is fixed.
    • Modified to register multiple false signals within the alert radius.
    • The Auto Mute Memory related values are adjusted to Delete count 5, Visit interval 4, Delete radius 60m, Mute radius 400m, Delete check 2sec.
    • The GPS Error1 is fixed.
    • The level setting of the K block filter to be automatically changed to match the selected mode when changing the highwaycity mode.
11/01/2024
R9 R9_GPS_DB_20241002.zip 2024/10/02 Database Update 20241002

Database 2024/10/02.

This database update is only compatible with the R9 models. Please do not update this GPS with any other models.

10/08/2024
R9 R9_FULL_SW_v1.28_db241002_24.10.08.zip 1.28 Firmware Update v1.28

Bundled with the latest database 2024/10/02.
See previous for release notes.
10/08/2024
R9 R9_FULL_SW_v1.28_db240402_24.04.15.zip 1.28 Firmware Update v1.28

Bundled with database 2024/04/02

  • Release Notes
    • Fixed an issue where GPS Error occurs once at boot time if there is a communication error with the Remote radar
    • Modified to display the version of Front and Rear Remote radar respectively
    • Modified to display update results ("Updated" or "Failed") for each Interface after the update
    • Fixed a problem that GPS-Err:1 occurs when running the Installer Test Mode
04/15/2024
R9 R9_FULL_SW_v1.26_db240124.zip 1.26 Firmware Update v1.26

Bundled with database 2024/01/24.
  • Release Notes
    • Installer Test Mode is added to verify that each interface of R9 works properly.
    • Signal Direction LED Color change
      • Front/Side : RED 
      • Rear : BLUE
    • Power Button Receive Mode is added. (PWR BTN RX : 10s ~ 30s (5s step)/Toggle, Default : Toggle)
      • Select amount of time for Laser Transponder to be in Receive mode before returning to mode selected in Laser Jammer Mode entry.
      • This mode is activated when the Laser is set to ON in the menu.
    • Any Button Receive Mode is added. (Any BTN RX : ON/OFF, Default : ON)
      • Set this to ON to allow any button press to change the laser transponder setting to receive. Once in receive mode, the buttons revert to their original function until a new laser alert is received and any button is pressed.
      • This mode is activated when the laser is set to ON in the menu.
    • The beep and text for Laser Receive Mode added.
      • Laser Tone-R option is added. If the jamming mode is set to the Receive mode, the beep sound selected in the menu will be made during laser alert.
      • If the jamming mode is set to Receive mode, the text of "receive" will be displayed as below during the laser alert.
    • Laser TP Off Option is added to the menu.
    • BLE is enabled
    • Jamming performance against Atlanta Gun (Stealth Mode) is improved.
    • Showing the version of each interface on the screen
      • Access to the menu item "SW Version / DSP Version" in the menu and then press the "MENU" key to show the version of each interface on the screen.
      • Each time you press the "MENU" key, the version of each interface will be down on the screen in the order:
        • Host/DSP Version > GPS Version > Sound Version > BLE Version > Keypad Version > Laser Version > Display Version
01/24/2024
R9W R9W_20250108_v113db250103.zip 1.13 Firmware Update v1.13

Bundled with the latest database 2025/01/03.
See previous for release notes.
01/08/2025
R9W R9W_FULL_SW_v1.13_db241002_24.11.13.zip 1.13 Firmware Update v1.13

Please use the Uniden R Series Tool to update your firmware.

  • Release Notes
    • If you set the Level of K Block Filter when the City Mode is Auto, the Level setting of K Block Filter is matched to the Highway mode the same as other R-series model in order to avoid frequent changes in the K block filter level setting criteria when the mode is frequently changed to City or Highway depending on the vehicle speed in Auto mode.
    • Fixed codes that could potentially cause some Auto Mute Memory points to fail to mute in regions where multiple Mute Memory points and Auto Mute Memory points are registered.
12/16/2024

Owner's Manuals

R9 R9om.pdf
English
R9W R9Wom.pdf
English
R9 R9om_SP.pdf Spanish
R9W R9Wom_SP.pdf Spanish
R9 R9om_FR.pdf
French
R9W R9Wom_FR.pdf
French
R9 R9om_QR.pdf
Quick Reference
R9 R9om_QS.pdf
Quick Reference - Spanish
R9 R9om_QF.pdf
Quick Reference - French
R9 R9om_IG.pdf
Installation Guide
R9W R9Wom_MS.pdf
Miscellaneous
R9W R9Wom_MF.pdf
Miscellaneous - French
R9 R9om_IF.pdf
Installation Guide - French
R9 R9om_IS.pdf
Installation Guide - Spanish