• Release Notes
  • New GPS DB 260407 has been applied.

• Release Notes
  • Added support for the Laser I/F, Junction Box, associated menus, Installer Test Mode, and R/Tach app.
  • GPS DB updated to 260105
  • Laser I/F Default set to Off

• Release Notes
  • Applied defensive code and a watchdog system to the GPS firmware to prevent errors.
  • Applied filtering to remove the Ka 33.750Ghz signal emitted from inside of some Chevrolet cars.

This tool is only compatible with MacOS. Changelog:

1. Add user settings (Menu) for the latest version for each model
2. Compatible with the R4w and R8w
3. Showing versions of Sound, BT or BT/Wi-FI that were not shown in the previous tools 
4. The way DB version is displayed is changed from “US DB : ___. ___. ___. ___. 2024/11/29” to “US DB : 2024/11/29”.
5. CP210x Driver installation error is fixed.

Please use the Uniden R Series Tool to update your firmware.

• Release Notes
  • Fixed codes that could potentially cause some Auto Mute Memory points to fail to mute in regions where multiple Mute Memory points and Auto Mute Memory points are registered.

Please use the Uniden R Series Tool to update your firmware.

• Release Notes
  • Factory default of Bluetooth is changed from Off to On.
  • Laser Atlanta Stealth gun detection is added.
  • K block 3 filter (24.123~24.124GHz) is added.
  • User K Block Filter 1,2,3,4,5 are added.
  • Selective mute memory frequency feature is added.
  • Auto Mute Alert Level feature is added. The existing Auto Mute On/Off is deleted from the menu and Auto Mute is integrated into Auto Mute Alert Level as below.
    • Add Off to the Auto Mute Level (Auto Mute Level: 1~8, Off)
    • Off is the same as the behavior of the existing Auto Mute Off, and the Auto mute function does not work when setting it to off.
    • If setting it to 1~7 level, the alert is auto muted only when the alert level is below the set Auto Mute level, and if an alert level exceeds the set Auto Mute level, it will not be auto muted.
    • If setting it to 8 level, Auto mute is applied to all levels, so it works the same as the existing Auto Mute On. (Auto Mute Level: 8 = Auto Mute On)
  • Alert temporary volume feature is added.  During an alert, it works separately and temporarily from the main volume.
  • Rear Balance function for each band (K, Ka, X) is added.
  • Main Volume setting is added to the Menu.
  • The Bluetooth On/Off and BT Pairing are moved to be before GPS On/Off menu in the Menu.
  • Low speed (5Km/h) filter for POI (Redlight, Speed cam) alerts is added.  
  • The Auto Mute Memory related values are adjusted to Delete count 5, Visit interval 4, Delete radius 60m, Mute radius 400m, Delete check 2sec.
  • GPS Error1 is fixed.
  • The audio announcement for DST ON/OFF reversed in the menu is fixed.

• Bundled with the latest database 2024/07/02.
• Please use the Uniden R Series Tool to update your firmware.

Please use the Uniden R Series Tool to update your firmware.

• Release Notes
  • Improved audio quality

• Please use the Uniden R Series Tool to update your firmware.


• Fixes and Updates (v 1.24 - 11/17/2022)
  • This version adds the Menu editing feature using the update tool "User Settings"

• Please use the Uniden R Series Tool to update your firmware.

• Fixes and Updates (v 1.23 - 11/16/2022)
  • Improvement in the ALERT PRIORITY feature that R8 can make faster decisions
    which signal should be displayed on the main screen when R8 receives more than two signal at the same time.

• Please use the Uniden R Series Tool to update your firmware.

• Release Notes
  • New GPS DB 260407 has been applied.

• Release Notes
  • Added support for the Junction Box menu in the R/Tach app.
  • GPS DB updated to 260105

• Release Notes
  • Applied defensive code and a watchdog system to the GPS firmware to prevent errors.
  • Applied filtering to remove the Ka 33.750Ghz signal emitted from inside of some Chevrolet cars.

• Release Notes
  • Added Menu and Installer Test Mode support for the Junction Box
  • Fixed BLE connection issues with certain smartphones
  • New GPS DB 251002 has been applied

• Release Notes
  • Added Error Messages for the external Laser Transponders.
  • During a Laser alert, the display will show "Receive" if the unit is in Receive Mode (not CW or Pulse Modes)
  • Added a tone selection menu for Receive Mode alerts.
  • Added voice anouncement for Laser Gun ID.
  • Supports Installer Test mode for external laser transponders.
  • Added a reminder message related to Receive Mode when toggled using the power button.
  • Grouped all Laser Atlanta laser guns into the "Atlanta" category.

• Release Notes
  • Add the power button receive mode for the optional, external laser transponders.
  • Add the any button receive mode for the optional, external laser transponders.
  • Add Pulse mode On/Off time for the optional, external laser transponders.
  • The Ka Freq voice will say trailing zeros without skipping zeros.

This tool is only compatible with MacOS. Changelog:

1. Add user settings (Menu) for the latest version for each model
2. Compatible with the R4w and R8w
3. Showing versions of Sound, BT or BT/Wi-FI that were not shown in the previous tools 
4. The way DB version is displayed is changed from “US DB : ___. ___. ___. ___. 2024/11/29” to “US DB : 2024/11/29”.
5. CP210x Driver installation error is fixed.

This tool is only compatible with MacOS. Changelog:

1. Add user settings (Menu) for the latest version for each model
2. Compatible with the R4w and R8w
3. Showing versions of Sound, BT or BT/Wi-FI that were not shown in the previous tools 
4. The way DB version is displayed is changed from “US DB : ___. ___. ___. ___. 2024/11/29” to “US DB : 2024/11/29”.
5. CP210x Driver installation error is fixed.

Please use the Uniden R Series Tool to update your firmware.

• Release Notes
  • Fixed codes that could potentially cause some Auto Mute Memory points to fail to mute in regions where multiple Mute Memory points and Auto Mute Memory points are registered.